Network Appliance NS0-093 Mock Exam - Valid NS0-093 Practice Materials

Rated:

, 0 Comments

Total visits: 21

Posted on: 05/29/25

The NS0-093 practice materials are a great beginning to prepare your exam. Actually, just think of our NS0-093 practice materials as the best way to pass the exam is myopic. They can not only achieve this, but ingeniously help you remember more content at the same time. It is estimated conservatively that the passing rate of the exam is over 98 percent with our NS0-093 Study Materials as well as considerate services. We not only provide all candidates with high pass rate study materials, but also provide them with good service.

Earning the NetApp Accredited Hardware Support Engineer certification can be a valuable credential for IT professionals who work with NetApp storage hardware. It demonstrates a high level of expertise in supporting and maintaining NetApp storage systems, and can help individuals advance their careers in the IT industry. The NS0-093 Exam is a challenging and comprehensive exam that tests the knowledge and skills of IT professionals who work with NetApp storage hardware.

>> Network Appliance NS0-093 Mock Exam <<

Valid Network Appliance NS0-093 Practice Materials - New NS0-093 Test Cost

We have thousands of satisfied customers around the globe so you can freely join your journey for the NetApp Accredited Hardware Support Engineer (NS0-093) certification exam with us. SureTorrent also guarantees that it will provide your money back if in any case, you are unable to pass the Network Appliance NS0-093 Exam but the terms and conditions are there that you must have to follow.

Network Appliance NetApp Accredited Hardware Support Engineer Sample Questions (Q51-Q56):

NEW QUESTION # 51
You have upgraded your cluster from ONTAP 9.5 software to ONTAP 9.7 software. After the upgrade, you notice that the upgrade causes issues. You decide to revert to ONTAP 9.5 software.
Which revert step is allowed?

A. Revert to ONTAP 9.5 software with the netboot procedure.
B. Revert from ONTAP 9.7 software to ONTAP 9.5 software by using the boot backup procedure.
C. Revert from ONTAP 9.7 software to ONTAP 8.6 software and then to ONTAP 9.5 software.
D. Revert directly from ONTAP 9.7 software to ONTAP 9.5 software.

Answer: A

Explanation:
Reverting to a Previous ONTAP Version:
* Reverting ONTAP software requires specific procedures and is only supported if the ONTAP version being reverted to is compatible with the current cluster configuration.
Why the Netboot Procedure Is Used:
* The netboot process loads the desired ONTAP version directly into memory from a network location and reinitializes the system.
* This method is used when a full software revert is required and is often necessary for downgrades to a version that cannot be directly reverted to from the running ONTAP version.
Key Notes:
* A direct revert is not supported from ONTAP 9.7 to ONTAP 9.5 using standard methods due to system metadata changes.
* Always verify compatibility using the "ONTAP Software Version Interoperability Matrix".
NetApp Reference Documentation:
* Refer to the "ONTAP Revert/Downgrade Guide" for specific instructions on using the netboot procedure.

NEW QUESTION # 52
Which two ONTAP systems support both SSD and SAS disks? (Choose two.)

A. FAS2750
B. FAS8200
C. AFF A220
D. AFF C190

Answer: A,B

Explanation:
The following ONTAP systems support both SSD and SAS disks:
* Description:
* The FAS2750 is part of NetApp's hybrid storage array product line.
* It supports both SSDs for performance tiers and SAS disks for capacity tiers, making it suitable for mixed workloads.
1. FAS2750
* Description:
* The FAS8200 is an enterprise-level storage system that also supports hybrid configurations with both SSD and SAS drives.
* This system is designed to handle high performance and capacity needs.
2. FAS8200
* A. AFF C190:
* The AFF C190 is an all-flash system and only supports SSDs. It does not support SAS disks.
* C. AFF A220:
* Like the AFF C190, the AFF A220 is also an all-flash system that supports SSDs only.
Why Other Options Are Incorrect:
* NetApp "Hardware Universe" confirms drive support for FAS and AFF systems.
* NetApp product documentation details supported disk types for hybrid and all-flash systems.
References:

NEW QUESTION # 53
Which two scenarios are common causes of the root volume needing root volume recovery? (Choose two.)

A. The mainboard was replaced following a Non-Maskable Interrupt (NMI) panic.
B. Root volume migrate was performed.
C. The cluster configuration is out of sync on the volume.
D. The root volume ran out of space.

Answer: A,D

Explanation:
* If the root volume runs out of space, it can cause operational issues and require recovery.
* The root volume must always have sufficient space for system logs, configuration files, and core dumps.
1. Root Volume Ran Out of Space:
* When a mainboard is replaced, the system configuration stored in the root volume may need to be restored or recovered.
2. Mainboard Was Replaced Following an NMI Panic:
* C. Root volume migrate was performed:
* Root volume migration is a normal operation and does not typically cause the need for root volume recovery.
* D. The cluster configuration is out of sync on the volume:
* While this can cause configuration issues, it does not directly lead to root volume recovery.
Why Other Options Are Incorrect:
* "ONTAP Root Volume Management Guide" explains scenarios leading to root volume issues and recovery procedures.
References:

NEW QUESTION # 54
On an AFF A700 system, a SAS stack is connected to SAS ports 2a and 2b. The system has an additional 4- port SAS card in slot 9.
How should the cabling the corrected for best practices?

A. Use port 2b and 9d.
B. Use port 2a and 9b.
C. Use port 2a and 2c.
D. Use port 2a and 9a.

Answer: D

NEW QUESTION # 55
Which statement best describes the functionality of RAID Error Propagation (REP)?

A. An unrecoverable error on a user data block triggers a NetApp WAFL inconsistency.
B. A recoverable error on a user data block triggers a NetApp WAFL inconsistency.
C. An unrecoverable error on a user data block does not trigger a NetApp WAFL inconsistency.
D. An unrecoverable error on a metadata block does not trigger a NetApp WAFL inconsistency.

Answer: C

Explanation:
Functionality of RAID Error Propagation (REP):
* RAID Error Propagation (REP) ensures that errors on the disk layer, such as unrecoverable read errors, do not propagate as inconsistencies into the WAFL (Write Anywhere File Layout) metadata layer.
* WAFL is designed to manage data blocks, and if an error occurs on a user data block, WAFL can identify and handle it gracefully without flagging an inconsistency.
Why Option A Is Correct:
* REP ensures that errors on a user data block are isolated and do not trigger WAFL inconsistencies.
Instead, the error is handled at the RAID layer or higher without corrupting metadata.
* This design provides a robust mechanism to protect against data integrity issues caused by disk errors.
NetApp Reference Documentation:
* Refer to the "ONTAP Storage Management Guide" and the "NetApp RAID Guide," which explain how RAID and WAFL interoperate and how REP is implemented.

NEW QUESTION # 56
......

our NS0-093 actual exam has won thousands of people’s support. All of them have passed the exam and got the certificate. They live a better life now. Our NS0-093 study guide can release your stress of preparation for the test. Our NS0-093 Exam Engine is professional, which can help you pass the exam for the first time. If you can’t wait getting the certificate, you are supposed to choose our NS0-093 study guide.

Valid NS0-093 Practice Materials: https://www.suretorrent.com/NS0-093-exam-guide-torrent.html

Tags: NS0-093 Mock Exam, Valid NS0-093 Practice Materials, New NS0-093 Test Cost, NS0-093 Book Pdf, NS0-093 Exam Discount

Comments

There are still no comments posted ...

Rate and post your comment

Username:
Password:
Forgotten password?

Most Popular

Network Appliance NS0-093 Mock Exam - Valid NS0-093 Practice Materials

Valid Network Appliance NS0-093 Practice Materials - New NS0-093 Test Cost

Network Appliance NetApp Accredited Hardware Support Engineer Sample Questions (Q51-Q56):

Login